1/16 DIN PID Temperature Controller (Relay Output)

$44.50

Features:

PID control with fuzzy logic enhancement for the best stability control
0.2% accuracy over the entire input range
Display in either Fahrenheit or Celsius temperature unit
Percent output indication for easy trouble shooting of the system.
Support both heating and cooling mode,
Built-in 10 A relay output with both NC and NO contacts.
Auto/manual control with bump less transfer
Dual alarm outputs with more than ten ways to activate
Selectable security access levels
High brightness large LED display that can be easily read from distance.
Manual, technical support and 90-days warranty

Description:

This is a dual display, 1/16 DIN size (1.89x1.89" or 48 x 48 mm) temperature/process controller. Common applications of this controller include controlling the temperature of industrial equipment, laboratory equipments, espresso machine, beer brewing system, BBQ grill and smoker, heat treatment oven, glass kiln, and aquarium.

The controller use advanced artificial intelligent enhanced PID algorithm that can handle system that is sluggish or difficult to control by the traditional PID controller. In most cases, the controller will hold the temperature within a reasonable range with the default PID parameters. The auto-tune feature will further improve control accuracy and stability within one degree of accuracy. In most cases, there is no need for user to play the confusing PID parameters in order to get the system stabilized.

This high precision, full featured industrial grade controller supports more than twenty different input devices that cover almost every possible application requirement. Two alarm outputs can be activated by more than 10 situations. All the control and setting parameters are stored in the non-volatile memory that will not be lost when powered off. Recently, we added an advanced cold junction compensation circuit to further reduce the temperature drift when thermocouple sensor is used.

One of the unique features for this controller is that the built-in relay can handle 10 A of current at 120VAC. That means 1200 watts of load can be connected directly to the controller without the need of an external relay or SSR. That is a very convenient for applications that only a small heater is used.

Main Specifications:

Input type	TC: K, E, S, WRe, J, T, B, NRTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm.DC voltage:0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V. DC current: 4~20mA.
Input range	K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF), J (32~1800ºF), B (32~3300ºF), N (32~2400ºF)Pt100 (-320~1100ºF), Cu50 (-60~300ºF) Linear input: -1999~+9999 defined by user
Display	Two lines, Four digits. °F or °C.
Display Resolution	1°C and 0.1 °C. or 1°F,
Accuracy	±0.2% or ±1 unit of full input range
Control mode	Fuzzy PID, Manual control, On-Off
Output mode	Relay w/ NO and NC contacts: 7A at 240VAC, 10A at 120VAC, or 10A at 120VAC
Alarm	Process high/low alarm, deviation high/low alarm
Alarm output	Relay contact: 1A at 240VAC, 3A at120VAC, or 3A at 24VAC
Power supply voltage rating	85~264VAC/50~60Hz
Front panel dimension	1.89x1.89", or 48 x 48 mm (1/16 DIN)