Universal 1/4 DIN USB PID Temperature Controller, Optional Ramp Soak

Typical lead time is 2-4 weeks. Please contact us for questions. 

This is a dual display, 1/4 DIN (96 x 96 mm or 3.78”x3.78”), universal process controller that supports various sensors and signals, offering multiple output types and features like self-tuning PID, alarms, timer and ramp soak functions. It can be configured via the front keypad or  USB port using QuickTune software, with options for remote setpoints, soft start, and loop break detection.

Features:

• Universal Input: Supports various analog sensors and linear signals. See table below for details. 
• Control Outputs: Dry relay, SSR (Pulse) and 4-20 mA outputs.
• Self-tuning PID Parameters: Auto-tune function
• Manual/Automatic Control: "Bumpless" transfer between modes.
• Alarms: Four independent alarms with minimum, maximum, differential, open sensor, event functions and timer alarm.
• Analog Retransmission: PV or SP retransmission in 0-20 mA or 4-20 mA.
• Remote Setpoint Input: Supports 0-20 mA, 4-20 mA, 0-5 V, and 0-10 V signals.
• Digital Input Functions: Five programmable functions.
• Programmable Soft-start: Gradual ramp-up of output power.
• Multiple Ramp Soak Profiles: Seven programs with seven segments each, linkable for up to 49 segments.
• Configuration: USB interface for configuration via QuickTune software. Save and transfer settings between devices.
• Safety Features:Initial blocking option for alarms, sensor break detection.
• Extra 24 VDC Power Supply: Provides power for field transmitters.

Specifications:

- Double LED display: red for PV (18 mm) and green for SV (13 mm)
- Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc. See range for each sensor in its manual below. 
- Sampling rate: 4 measurements per second
- Measured value resolution: 12,000 levels
- One digital input for dry contact with 5 programmable functions
- Remote setpoint input for 4-20 mAdc signal
- A total of 4 dry relay outputs (I/O1 ~ 4). Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm. 
 - 2 SSR outputs (I/O5 ~ 6). I/O5 is rated as 10V max/20mA. I/O6 is rated as 5V max/20mA.  I/O5 can also be programmed as 0-20mA / 4-20mA linear output. 
- Isolated 4-20 mA output (I/O5) with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be configured for digital input or output (10 Vdc / 20 mA)
- Auto tuning PID control. Auto/Manual mode, bumpless transfer
- Programmable Soft start up to 9999 seconds
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments
- Control output update: 250 ms
- Up to four configurable relays, two timer alarms
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event
- Alarm initial blocking function
- Power: 100 to 240 Vac, 50/60 Hz
- Maximum consumption: 3 VA
- 24 Vdc / 30 mA supply output for remote transmitter excitation
- Front panel: IP65, Polycarbonate UL94 V-2
- Back panel: IP20, ABS + PC UL94 V-0
- Enclosure: IP20
- Circuitry can be removed from the front panel
- Operating environment: 0 to 55 ºC, 20 to 85 % RH
- Dimensions: 96 x 96 x 92 mm, 1/4 DIN
- Panel cutout: 93 x 93 mm
- UL listed

Click here to download instruction manual.

QuickTune Software (Windows OS) (V2.0.5.09)
QuickTune User Guide
QuickTune Videos (Intro, Tutorial)