This product is out of stock. Please check SYL-3615.
Note: SYL-2615 is not compatible with mesh routers. For mesh router users, please use KIT-3615 controller set.
Features:
- More stable and tight PID control than competitors.
- Three control modes: Fan Speed, Duty Cycle, and Manual.
- Multi-steps programmable cooking temperature profile.
- Most durable and accurate probes.
- Open-lid detection.
- App based Wi-Fi interface for remote control.
- Easy to set up Wi-Fi configuration.
As a professional and experienced PID manufacturer, Auber’s controller provides a more stable and tight temperature control than other competitors* on the market. In addition to the solid control performance that has been proven by our older model SYL-1615 (see a review
here), a few long-desired features have been introduced to this new model SYL-2615:
• Three control modes to control the blower. 1) PID fan speed control mode. The controller adjusts the fan speed using PID algorithm. This control mode is suitable for smokers with steel wall such as Weber Smokey Mountain. It reduces the amount of ashes that can be blown up (see the application note for details). 2) PID duty cycle control mode (PWM). Instead of adjusting the speed of the fan, the controller adjusts the percentage of time that the fan will be running in full speed. This is the same control method used by our SYL-1615 series controller and many other PID controllers. This mode is more suitable for Kamado grills/smokers, such as Big Green Egg, which usually require very low air flow. The PID duty cycle control mode provides a higher precision control in the low air flow situation than the fan speed control mode. 3) Manual control mode. It allows a user to manually adjust the speed of the fan regardless the temperature. It’s just like a dial of a cook top. This mode can be used in occasions when a user want to take over the temperature control and manually adjust the fan speed. It can also be a useful tool for tuning the system.
• Multi-step temperature control. Users can configure this controller to work either in single-step control mode, which is common to most smoker controllers on the market, or in multi-step control mode, which has been used on our electric smoker controller for many years and is copied by others. In the multi-step mode, a user can program a different target pit temperatures for each step. And each step can end either by a pre-set timer, or by reaching a pre-set food temperature. For example, a user can set a low pit temperature in Step 1 for two hours to let smoke flavor gets a good penetration to the raw meat. Then, the user can bring pit temperature up to a higher temperature in Step 2 to finish the cooking. In another example, user can set the pit temperature in Step 1 to higher than normal to speed up the “low and slow” cooking without compromising the moisture. Program the pit temperature at 275°F in Step 1. Then, go to Step 2 if the food temperature reaches 170°F. The pit temperature of Step 2 is set at 225°F and stay there for a set timer duration. This gives user a better control than the “ramp mode” used by other manufacture. A total of three steps can be programmed. When the entire program is finished, the controller will stop the blower and alert the user.
• Dual-probe. This controller has two probes: one pit probe (
WS-SENSOR17) for monitoring and controlling the pit temperature, and the other for monitoring the meat temperature. RTD sensing elements are used to give accurate measurements in all weather conditions. The performance of a RTD sensor based system is more robust than a thermistor or thermocouple based system. The probes are equipped with the highest quality RTD cable made in the USA. The high temperature cable is strong, durable, and easy to clean.
Two types of meat internal probes are offered.
1). Standard food probe: WS-SENSOR18. It has L-shape with pointed tip. Max temperature is 650F.
2). Miniature food probe: WS-SENSOR22. It has thin and small tip, suitable for small piece of meat such as fish. Max temperature is 400F. See more details for this probe here.
• Open-lid detection. The controller will pause the blower automatically when it detects a sudden temperature drop. A sophisticated algorithm that can handle many possible open-lid scenarios has been employed. The algorithm is specially tuned to have minimum pit temperature overshooting if the lid is opened for a quick food inspection.
All the included parts in this kit (WS-SENSOR18 food probe is in the picture).
• Wi-Fi Connection. This controller can be operated via your smartphone through the Wi-Fi connection. Different than some old web based Wi-Fi controllers on the market, this controller is app based. The app based interface is more user friendly with more functions. It gives user a feeling that the phone is integrated as a part of controller. (As a good analogy, the difference between the web and app based interface is just like the experiences of finding the local weather information by using a weather app or by browsing the wheather.com). The Wi-Fi connectivity provides several advantages and features than controllers without Wi-Fi connection.
- Access the device remotely. It allows you to check the temperature readings, or change settings from your smart phone at anytime from anywhere (yes, anywhere!) as long as you have cellular or Wi-Fi internet access. You will be able to monitor the device when you are not near the controller.
- Easy to view and analyze the performance. Our app offers graphic plots to show the temperature and blower output data over the time. You can also export the data to a CSV file for further analysis.
- User-friendly interface. Setting up the control parameters through the app is much easier than doing it from the controller. On the controller, the information can be displayed is very limited and using the four-key input is cumbersome. In addition, to change parameters you might have to check the manual from time to time to learn what do these parameters do. In contrast, when you change settings from AuberSmart app, the function and the setting range of each parameter will be denoted on the screen to save the hassle of checking the operation manual.
- An integrated solution. The AuberSmart app makes the smart phone as one part of the controller system. The system has more functions and easier to operates. Moreover, you can manage multiple devices from the AuberSmart device family just with a few clicks (see figure below). Instead of using one app for only one type of device, our smart phone app is the central control console for different types of AuberSmart devices. You will get a better user experience than web based interfaces of other Wi-Fi enabled devices.
- Easy to configure Wi-Fi connection (Video: Android, iOS). In the old days, configuring a Wi-Fi enabled device to the internet was a complicated task. It required knowledge of networking and usually took several steps. Now with the new technology we used, the configuration is much simple. Once you put the controller in Wi-Fi configuration mode (by pressing two keys for 5 seconds), all you need to do is entering your Wi-Fi password from your phone and click “add device” button, which is much easier than doing it from the keypad on a controller. The app will finish configuring the device within one minute.
 |
 |
| The main screen in the AuberSmart App. |
Data plots of temperature in the past 2 hours. |
 |
 |
| Screen shot of the Parameter Setting page. Every parameter name is followed by its definition. |
Three devices (2 x SYL-2615 and 1 x TH220-W) are monitored by the phone at the same time. |
Specifications:
| AC adaptor: |
100 ~ 240 V, 50 / 60 Hz input. 12V DC, 1 Amp output. |
| Power consumption (Controller only) |
< 0.9 W (without blower) |
| Sampling rate: |
2 samples/second |
| Accuracy: |
0.2 % full scale |
| Display range: |
-99 ~ 930°F, or -99 ~ 500°C |
| SSR output for Fan: |
12 VDC, 1 Amp |
| LCD display: |
Backlit LCD, black on white |
| Control Mode: |
PWM, Fan-speed, Manual |
| Alarm: |
High/low alarm for Pit temp. High alarm for food temp. |
| Sensor: |
PT1000 RTD, -99 ~ 650°F (-99 ~ 350°C)
(400°F or 200°C for WS-SENSOR22) |
| Wireless Standards: |
2.4Ghz, IEEE 802.11 b/g/n |
| Security Protocols: |
64/128 - bit WEP, WEPA, WPA2, TKIP, AES |
| Dimension: |
4.4 x 3.3 x 1.3" (113 x 83 x 33 mm) |
• Warranty: one (1) year for controller and blower, 90 days for sensors.
• Some routers are NOT compatible with our WiFi module, please click here to see a list of uncompatible routers.
• If you have DeWalt® power drill or other power tools that use DeWalt® 20V Max battery, PA-DD1 power adapter will allow you to power our charcoal smoker controllers with the same battery. Please find it
here.
• Optional 12V Li-ion battery pack can be purchased from other vendors (
Amazon Link). Auber has tested this 12V/8300mAh battery pack, which has enough capacity to power our BBQ controller with fan for a regular smoking or BBQ process.
*: Control graphs and reviews:
This product was added to our catalog on Tuesday 04 April, 2017.
