Blower Power Adapter, AC to DC, 12V, 1A, Female Connector

This is an AC to 12V DC power adapter with a female output connector for 5.5 mm OD and 2.5 mm ID power plug. It can be used to power Auber's BL-6.5, BL-10, and BL-20 blowers directly without connecting to a controller. It can also allow the output of the Auber Electric Smoker Controller to be connected to our charcoal smoker blower so that the controller can be used for either electric smokers or charcoal smokers.  
It is one of the best quality adapters on the market. It not only has very good electronic specification, but also has very good mechanical integrity. It is built to last.  
  

Features

• Small size,  reliable,  stable and high efficiency
• Input: 100-240V AC, frequency 50/60Hz, surge <30A/240V
• Output: 12V DC, maximum 1A. Voltage tolerance +/- 5%, ripple and noice (mVp-p) <1% output voltage. startup time <1s, hold up time >20 ms (input=240V, lo=100%)
• Level 3 Efficiency: >84%
• Built-in over current, over load, short circuit protection. Recover automatically
• Insulation: Input-output: 3000V AC/10mA, 1min, or 3600V AC/10mA 1 sec
                  Input-case: 3000V AC/10mA 1min, or 3600V AC/10mA 1 sec
• Insulation resistance: Input-output >= 30Mohm. Input-case >= 50Mohm at DC500V
• Operation Temperature: 0 ºC to 40 ºC ( 32  ºF to 104 ºF), 5% - 90%RH
  Storage temperature: -20 ºC to 85 ºC, 5%-95%RH, Altitude < 3000m
• Pin size: 5.5 mm OD, 2.5 mm ID
• UL Listed