This is a snap-on blower that can be installed on many smoker pits without using an adapter. The requirement is that the mounting hole should be less than 1.25 (32 mm) at the maximum dimension. This unique design (patent pending) is much easier to install than the other product on the market. Click here to see how easy it is to install or remove the blower. If the snap-on spring can't be used, the flange of the blower also has four mounting holes for screw mounting. The blower has a built-in shutter that completely blocks the draft when the fan motor stops.
Optional adapters:
Example pictures for mounting plates.
For the Kamado style smokers (such as Big Green Eggs, Primo and Grill Dome) that have a sliding door for ventilation, an adapter plate is needed. Please find mounting adapter plate selection guide here.
For the other brand smokers, users need to measure the height of its ventilation door. If it is less than 90 mm, users can trim the adapter for Big Green Eggs to make it fit. For example, users can trim the adapter for the large Big Green Egg from 77 mm to 59 mm to fit the Grill Dome. For smoker vents that have uneven surfaces, we offer a 4.5 mm thick silicone foam high temperature gasket. Please select the appropriate adapter plate from the dropdown menu if you need one for the blower.
Note: ACC-VPS6 plate is offered for Vision Grills Pro.
Specifications:
| Power source |
12 VDC, 3W |
| Cable length |
4.5 ft (1.5 M) |
| Electric power connector |
5.5 mm OD, 2.5 mm ID |
| Blower maximum flow rating |
6.5 CFM* |
| Blower opening |
0.8x1.0" (20x27 mm) |
| Maximum venting hole size for snap-on mounting |
1.2" (32 mm) |
| Flange outer dimension |
1.6 x 2.0" (40 x 50 mm) |
| Flange mounting hole distance |
25 x 41 mm |
| Flange mounting hole size |
3 mm in diameter |
| Silicone foam gasket |
4.5 mm (0.18") thick. Same outer and inner dimension as the flange |
Warranty: 90 days
*The maximum air flow rating (rated at zero static pressure) may not reflect the true performance of the blower for this application. The static pressure rating is also important. The fan used in Auber blower is from one of the highest quality fan manufacturer. When compared with a 5 CFM blower from competitor, our 6.5 CFM blower moves more than twice the air mass in the real application condition. It is comparable to the performance of the 10 CFM blower from other manufacturer. Click here for installation guide.
This product was added to our catalog on Wednesday 29 January, 2014.
