Snap-on Blower for Charcoal Smoker 20 CFM

This is a snap-on blower that can be installed on many smoker pits without using an adapter.  The requirement is that the mounting hole should be less than 1.85 (48 mm) at the maximum dimension. This unique design (patent pending) is much easier to install than the other product on the market. Click here to see how easy it is to install or remove the blower. If the snap-on spring can't be used, the flange of the blower also has four mounting holes for screw mounting. The blower has a built-in shutter that completely blocks the draft when the fan motor stops.

For the Kamado style smokers (such as Big Green Eggs, Primo and Grill Dome) that have a sliding door for ventilation, an adapter plate is needed.  We currently offer the adapter for extra-large Big Green Eggs. The outer dimension is 2.5 x 3.4" (64x87mm). For the other brand smokers, users need to measure the height of its ventilation door. If it is less than 90 mm, users can trim the adapter for extra-large Big Green Eggs to make it fit. Please find the adapter plate selection here. 

Please select the appropriate adapter plate from the dropdown menu if you need one for the blower. Click here to see a list of our accessories for charcoal smokers. 

If you need an additional 12VDC power adapter (PAF-12V-1A) for the blower, please click here for the product page. 

Specifications:
• Power source: 12 VDC, 0.68A, 8W.
• Cable length: 4.5 ft (1.4 m).
• Electric power connector: 5.5 mm OD, 2.5 mm ID.
• Blower maximum flow rating: 20 CFM
• Blower opening: 1.2x1.6" (30x40 mm).
• Maximum venting hole size for snap-on mounting: 1.85" (48 mm)..
• Flange outer dimension: 2.0 x 2.5" (49x 62 mm). 
• Flange mounting hole distance: 34 x 53 mm, hole size, 3 mm in diameter.
• Warranty: 90 days

Click here for installation guide.