This sensor is for measuring engine water and oil temperatures. Unlike most oil/water temperature sensors on the market that use thermistor sensing elements, this sensor uses a RTD sensing element. The advantage of the RTD is increased accuracy and wider temperature range. When used with our SYL-1813 gauge, you will be able to measure from -199 C to 250 C (or -199F to 500F) with less than 1 degree error. No other water/oil temperature gauges can match its performance. In addition, you will be able to use all of SYL-1813’s advanced features, such as max/min temperature recall function and programmable control output.
This sensor is about the same length as the VDO water/oil temperature sensor with 1/8 NPT mounting. It can be used for ports that the VDO sensor uses. However, if you are using a plug adapter to mount the sensor into the oil gallery located on the back of the engine block, you might need a longer probe as show as the optional longer sender in the picture below. Click here for the longer sender.
Specifications:
| Sensor type |
Platinum 100 ohm (Pt100) RTD |
| Precision |
Class A |
| Temperature range (when used with SYL-1813) |
-199~ 250C or -199~500F |
| Mounting thread |
1/8 NPT |
| Tip length |
22 mm (0.87") from the end of the thread |
| Diameter |
4 mm |
| Material |
304 Stainless Steel |
| Cable length |
2 meters (80 inches) |
| Cabel type |
three-conductor shielded with stainless steel braid |
Please note, this sensor is designed to work with Auber Instruments’ meter only. It will not work with other manufacture’s water/oil temperature gauge unless it is for Pt100 RTD sensor.
Click here to download instruction manual
This sensor is also available with 13ft (4 meters) long cable for $9 extra. To order it, please check the option box above.
This product was added to our catalog on Saturday 23 May, 2009.
