Timer for Beer Brewing, Multi-Events, 12V/24V AC/DC

  • Model: JSL-73C-24

(image for) Ask a Question

$44.32

Please Choose:

Power Supply Voltage Option





Add to Cart:

This timer is designed based on commonly used beer-brewing recipes. It can help brewers track the duration of the whole boiling process and remind brewers to add hops or other ingredients at each specific time.

The setup is very simple. There are only three parameters to be set:

1) Number of events. Up to nine events can be selected.

2) Relay/Alarm on time for the event.

3) Boiling time of each event as the recipe provided. There is no need to calculate each ingredient's addition time from the beginning of the whole boiling process.

When each event is up, the relay will pull in. It can be connected to a flashing buzzer (optional). The on duration of the relay can be programmed by the user. It can be a few seconds (if you are nearby) or on until cancelled (if you are far away). User can also program the timer so that it will pause when each event is up, giving you plenty of time to change the system. User can then press reset key to run the next event. 

While the timer is running, the bottom display shows the remaining time to the end of boiling. The top display shows the remaining time to the next event so that you can judge if there is enough time to run some short errands.

Specifications
Timer range:1 to 250  minutes.
Number of Events: 1 to 9.
Timer accuracy: <1 s/day.
Power supply: 12 or 24 V AC/DC
Power Consumption: < 2 W
Relay output:7 A @ 240 VAC,10 A @ 120 VAC and 24 VDC (resistive load)
Relay life: 100,000 times.
Operating temperature: 0 - 60°C.
Humidity: 0 - 95% RH
Panel cutout: 44.5 x 44.5 mm
Dimension: 48 x 48 x 78 mm

Please click here for instruction manual


This product was added to our catalog on Tuesday 05 January, 2016.

Copyright © 2024 auberins.com.