Note: SYL-2802B can only read PT100 RTD sensor. It cannot read thermocouple. For a dual channel meter to read thermocouple, please check SYL-2813AC.
This dual channel temperature meter can measure and display temperatures from two probes at the same time. It allows the user to monitor the temperature of more spots with limited panel space. This unit works with Pt100 RTD type temperature sensor. It contains two relays that can be programmed to turn on (or off) at specific temperature (range) separately. These relays are versatile and can be used for many different types of applications. For example, each relay can be programmed as process (absolute) alarms. It can be set to turn on when alarm condition meets. It can also be set to a single pulse for a pre-determined time duration, so that it can be turned off by itself automatically. When the relay is set to latch mode that can only be turned off by user intervention, it can be looped into the control output, so that it functions as an over temperature protection mechanism. If the relay is set to turn on when the temperature is not in the alarm zone, it can be used to control other devices for the specific temperature range, such as a circulation pumps.
Specification:
Input type: RTD (Resistance Temperature Detector): Pt100
Input range: -328~1112 °F (-200~+600 °C)
Accuracy: ±0.2% or ±1 unit of full input range
Display resolution: 1°C, 1°F or 0.1°C, 0.1°F
Control mode: On-off
Alarm output: Relay AL1 for Channel 1 (NO and NC contacts): 7A at 240VAC, 10A at 120VAC, or 10A at 24 VDC
Relay AL2 for Channel 2 (NO only): 3A at 240VAC
Alarm function: Process high/low alarm, Latching/pulse action
Power supply: 85~260VAC/50~60Hz
Power consumption: ≤ 2 Watt
Ambient temperature: 0~50ºC, 32~122ºF
Dimension: 48 x 48 x 100 mm (W x H x D)
Mounting cutout: 45 x 45 mm
This product was added to our catalog on Friday 12 August, 2016.
