Oil/Water Temperature Sensor, High Precision

  • Model: PT100A-NPT

(image for) Ask a Question

Starting at: $28.50

Please Choose:

Longer Cable Option




Add to Cart:

This sensor is for measuring engine water and oil temperatures. Unlike most oil/water temperature sensors on the market that use thermistor sensing elements, this sensor uses a RTD sensing element. The advantage of the RTD is increased accuracy and wider temperature range. When used with our SYL-1813 gauge, you will be able to measure from -199 C to 250 C (or -199F to 500F) with less than 1 degree error.  No other water/oil temperature gauges can match its performance. In addition, you will be able to use all of SYL-1813’s advanced features, such as max/min temperature recall function and programmable control output.

This sensor is about the same length as the VDO water/oil temperature sensor with 1/8 NPT mounting. It can be used for ports that the VDO sensor uses. However, if you are using a plug adapter to mount the sensor into the oil gallery located on the back of the engine block, you might need a longer probe as show as the optional longer sender in the picture below. Click here for the longer sender.

Sensor length comparision

Specifications: 

Sensor type Platinum 100 ohm (Pt100) RTD
Precision Class A
Temperature range (when used with SYL-1813) -199~ 250C or -199~500F
Mounting thread 1/8 NPT
Tip length 22 mm (0.87") from the end of the thread
Diameter 4 mm
Material 304 Stainless Steel
Cable length  2 meters (80 inches)
Cabel type three-conductor shielded with stainless steel braid


Please note, this sensor is designed to work with Auber Instruments’ meter only. It will not work with other manufacture’s water/oil temperature gauge unless it is for Pt100 RTD sensor.

Click here to download instruction manual

This sensor is also available with 13ft (4 meters) long cable for $9 extra. To order it, please check the option box above.


This product was added to our catalog on Saturday 23 May, 2009.

Copyright © 2024 auberins.com.