K type high temperature thermocouple for heat treatment

larger image

Model: WRNK-191

Starting at: $19.49

Please Choose:

Connector Option

Probe Length Option

Probe Option

Add to Cart:

This K type transition style high temperature thermocouple probe can be used for glass kilns and heat treatment ovens. The maximum working temperature is 1100°C (2000°F). Please be noted, for 6" probe, the maximum insertion length is 3". The maximum temperature on the transition area (connecting the probe tip and cable) is 400°C (750°F).

Shown in the picture: 6" probe with spade connector (left) and 6" probe with thermocouple mini connector (right).

Connector comparison

Note 1: To order the 10" probe, please select the probe length at the top of page when placing the order.
Note 2: This probe doesn't fit Ad-KEGTS. If you need compression fitting, please check WRNK-193 (3.0 mm diameter).

Note 3: This probe can be bent using tube benders. We can also bend the probe for you. Please leave a note for this special request during the checkout.

Note 4: Polarity: 1) for red & yellow wires, yellow wire is positive. 2) for red & black wires, red wire is positive.

Specifications:

Probe length	6" (150 mm) or 10" (250 mm)
Probe diameter	5/32” (4.0 mm) for 6" and 10" probes
Tubing material	Inconel 600 alloy
Transition section dimension	0.3” in diameter and 1” long
Cable	6 ft (2 meters) long
Cable insulation	Fiberglass with stainless steel overbraid (900°F)