DIN Rail Mounted Circuit Breaker

These circuit breakers can be used in the homebrewing or other applications. They are to be mounted inside the control box on a DIN rail. They provide extra safety protection for the control box. They are designed for North American power systems. They are UL 1077 approved. This is the standard for the supplementary power protection. As a safety device for high power application, it is highly recommended to use a UL listed device instead of the ones that have no certification. Safety testing performed by Underwriters Laboratories (UL) is the most respected in the world.

Features
·         USA standard UL 1077 approved
·         Standard 35 mm DIN rail mounting
·         Standard ratings of 5 kA at 480Y/277 Vac (Icn = 5kA, AC Type)
·         Rated frequency 50/60Hz
·         Suitable for supplementary protection
·         Thermal-magnetic over current protection
·         C curves protection for option
·         Trip-free design, breaker cannot be defeated by holding the handle in the ON position
·         Captive screws cannot be lost
·         Field installable shunt trip and auxiliary switch subsequent mounting
·         18 mm width* (per pole)
·         Contact position indicator (red/green)
·         Possibility for locking the toggle in ON or OFF position

* For 2 poles 100A breaker, the width is 54mm.