TC-K-KLNSH
This ceramic sheath is for protecting the Hi Temp Thermocouple for kilns (TC-K-KLN) when heated by fuel. It prevents the thermocouple element from exposing itself to the reducing gas and extends its life. The ceramic...
$22.99
... more info
TC-KEGTL
This EGT sensor is a K type thermocouple with exposed tip junctions for fast response times. With a maximum insertion of the tip at 2.7” (70mm), this probe has a longer tip for larger exhaust pipe that can be used for...
$36.50
... more info
TC-K-BR
This K type thermocouple is suitable for chimney, smoker and low temperature oven applications (see temp rating below). The thin diameter probe (1/8" or 3.0mm) offers fast response time in the air. The bracket on the...
$19.00
... more info
TC-K-WS
This K type thermocouple is to be mounted on the surface of the pipe or stove with a #10 screw. Maximum working temperature: 900°C (1650°F). Cable insulation: Fiberglass with stainless...
$15.85
... more info
TC-K5
This type K thermocouple has a bare sensor tip and glass braided wire insulation. It can be used for measuring air temperatures for the fast response time of the bare tip. It can also be fit into a thermowell because...
$7.99
... more info
TC-K-SF
Features Low thermal mass Fast response Flattened junction Flexible Rugged construction Economical This is a low-cost, fast-response, versatile type K thermocouple sensor that can be used for...
$19.95
Add:
TC-K-S01
This is a Type K surface thermocouple probe for air/liquid. It can be inserted into air and non-caustic gases for surface temperature measurement. This probe is widely used in industrial, manufacturing and commercial...
$27.95
Add:
TCCON
Panel mount connectors are useful for small temperature control projects, if you want the temperature probe to be disconnected when not in use. However nowadays, they are hard to find because most manufactures use circuit...
$16.40
Add:
TCCON2
This pair of connectors can be used to extend the thermocouple cable length. It can be installed to the thermocouple extension cable for easy installation and removal. For accurate temperature measurements, thermocouple...
$20.95
Add:
TCMALE
This connector will fit with any commercial thermometer that has a standard mini connector jack. This is one of the highest quality mini connectors on the market. The connector comes with a wire clamp, strain relief and...
$10.95
Add:
TC-KCHT14
This sensor is to be installed between the cylinder head and spark plug hex to monitor cylinder head temperature (CHT). Specifications: Sensor type K type thermocouple Ring size (I.D.) 14 mm Ring thickness 2 mm...
$36.99
Add:
Pclip
This probe clip can be used to mount the temperature probe between the racks of a smoker. This probe clip fits our WS-SENSOR10A, WS-SENSOR15 and WS-SENSOR17. It can also fit third-party probes which have minimum...
$2.99
Add:
