This maintained or momentary pushbutton switch can be used to control the 120 V power to devices such as controllers, buzzers, and small fans. It has one pair of normally open (NO) contacts and one pair of normally closed (NC) contacts. Both are rated for 5 Amp at 250 VAC. 110V AC and 12V DC LED voltage options are available. 6 pcs of wiring connectors are included.
Note 1: Wiring harness (wire connector) is offered for this switch. Please see the option above.
Note 2: 3 weeks lead time may apply for 100 pcs order. For questions of our switches (different LED color, size, wholesale pricing, etc), feel free to contact us.
Specifications
| |
SW13-UL-110 |
SW13-UL-12 |
| LED Color |
red, green, or blue |
blue |
| LED Voltage |
110 VAC |
12 VDC |
| Operation Current Rating |
5 A @ 120 VAC,
3 A @ 250 VAC |
5 A @ 120 VAC,
3 A @ 250 VAC |
| Panel Thickness |
1 ~ 8 mm (5/16'') |
1 ~ 8 mm (5/16'') |
| Cutout Diameter |
22.5 mm (7/8'') |
22.5 mm (7/8'') |
| Switch Terminals |
Pin 1 and 2, NC;
Pin 3 and 4, NO;
Pin 5 and 6, LED |
Pin 1 and 2, NC;
Pin 3 and 4, NO;
Pin 5 and 6, LED |
| Operation Type |
maintained/momentary |
maintained |
| Ingress Protection |
IP67 |
IP67 |
| Body Material |
Stainless steel |
Stainless steel |
| Accessories |
6 wiring connectors |
6 wiring connectors |
Click here for Switch Selection Guide
Note: the nut and the gasket should both be installed behind the panel.
Dimensions
Dimensions (in mm)
Typical Wiring (110V LED)
Typical Wiring (12V LED)
This product was added to our catalog on Wednesday 10 May, 2017.
