UL listed Illuminated Metal Push Button Switch, 110/220VAC, 16mm

Two options are offered, maintained action and momentary action. The maintained push-button switch can be used to control the 120Vac power to devices such as controllers, buzzers, or small fans. The momentary push-button switch can be used as a start key or a reset key for timers. 

There are three poles on the switch for wiring a load. One is normally open pole, one is for normally closed pole, and the third pin is the common pole. 

Note 1: Wiring harness (wire connector) is offered for this switch. Please see option above.

Note 2: 3 weeks lead time may apply for 100 pcs order. For questions of our switches (different LED color, size, wholesale pricing, etc), feel free to contact us. 

Specifications

Note: the nut and the gasket should both be installed behind the panel.

Four LED colors (blue/green/red/white) to choose from.
Right: Maintained Action: ON position on the right, OFF position on the left
Dimensions (mm)
Typical wiring (110V LED): Turn indicator on when button is pressed	Indicator is always on