Humidity Sensor

This sensor is designed to be used with Auber Humidity Controllers to measure the relative humidity. Please find the compatible controllers below. This sensor is NOT compatible with TH102, SYL-2342H. Three sensor cable options are available:

Sensor cable option for TH230A: compatible with TH230A, TH230A-W, HD230-W.
Sensor cable option for TH220: compatible with TH215, TH220, TH220A, TH220-W, TH220A-W, HD220, HD220-W.
Sensor cable option for TH210: compatible with TH210, HD100, HD200.

Note 1: this sensor is temperature & humidity 2-in-1 sensor. It requires a temperature & humidity controller (TH series) to display temperature value. Humidity only controller (HD series) can only display humidity value. 

Note 2: For the sensor with case, you will receive the sensor block with beige outside case (see below). For the sensor without case, you will receive the sensor board only. You can use the case from your current sensor. To open the sensor block, please try to pry the side of the case. 

Specifications
Humidity range: 0 - 99.9% RH
Temperature range: -40 - +80 ºC
Precision: 3%RH, 0.5 ºC
Sensor Dimension: 2.1/2'' x 1 3/4'' x 1 1/8''
Cable Length: 6 ft (2m)

Humidity sensor with case (HSR-HD200) with the cable and connector attached. 

Warranty: 90 days

Note:

• To avoid condensed water dripping into the humidity sensor and damaging the circuit board, please consider hanging the sensor block facing down.