Wireless Dual Outputs Programmable Humidity Controller (WIFI)

Thanksgiving sale ends on 12/1/2024!

This AW-HD330 two-way humidity controller with Wi-Fi connectivity contains one humidity sensor and two independent outputs. One output is for humidifying and the other is for dehumidifying. To connect, you need to only plug in the power cord plugs from your humidifier and/or dehumidifier directly to the outlets on the side of the controller. This humidity controller can be used for applications like tobacco/herbal dehydration, sausage curing, piano humidity control, etc. By using both humidifying and dehumidifying, the humidity ratio can be regulated to a specific value, regardless if the weather is either dry or wet. This controller is a plug-n-play device, requiring no extra wiring and containing a simple on/off operation; This controller is similar to a mechanical humidistat but with high precision due to the adjustable hysteresis band, precise sensor, and digital readout. Two operating modes are provided: Single-step mode and multi-step mode. For multi-step mode, this humidity control is programmable that varies with time for up to 8 humidity-time steps covering up to 33 days.

This controller can be used in high relative humidity (>85%) and condensing environments, which are among the most challenging conditions for humidity controllers. For example, when controlling the humidity of a curing fridge at temperatures below the dew point of the ambient environment, opening the fridge door will cause water to condense onto the sensor. Also, when controlling the humidity at a humidity level that is close to 100%, a slight temperature drop may cause condensation on the sensor.  As a result, this will usually lead to unstable readings on humidity sensors while also potentially damaging the sensor. This controller, however, is equipped with the utmost robust sensor available on the market that is able to withstand such situations.

Wi-Fi Function:
This controller can connect to a Wi-Fi router via a 2.4GHz Wi-Fi band, and it can be operated via your smartphone remotely. The app-based control feature gives a sense that your controller is always in your pocket. And now, it's easier than ever to control all the features remotely and directly on the AuberWIFI app from your smart device. (As a good analogy, the difference between the web and app-based interface is just like the experience of finding the local weather information by using a weather app or by browsing weather.com). Such advantages of using app-based control include:

1) Remote access. Using the AuberWIFI app, you are able to check/change the humidity setpoints and all the parameters at any time from anywhere, as long as you are connected to a cellular or WIFI internet. You will be able to monitor the device when you are not near the controller. 

2) Easy to view and analyze performance. Our app offers graphic plots to show the humidity data over time. You can also export the data to a CSV file for further analysis.
 
3) User-Friendly interface. Setting up control parameters through your smartphone is an easier and quicker alternative than the traditional keypad. Through the keypad and two-line display, you may need to refer to its manual to recheck the parameters from time to time again. But with the innovative AuberWIFI app, the function and setting range of each parameter will be denoted on the screen to save the hassle of maneuvering the device. 

4) An integrated solution. The AuberWIFI app gives the user a sense that their phones are integrated as a part of their controller. The system has more functions and is easier to operate.  Moreover, you can manage multiple devices from the Auber WIFI Device family just with a few clicks. Instead of using one app for only one device model, our smartphone app acts as the central control hub for different types of AuberWIFI devices, giving you a better user experience than web-based interfaces of other WiFi-enabled devices.

The main screen of the AW-HD330 in the AuberWIFI App.	Three devices are monitored by the phone at the same time.

Screenshot of the Parameter Setting page. Every parameter name is followed by its definition.

Specifications

* Notes 

• Although both humidifying and dehumidifying output can handle up to 15A; the total power of the two channels is limited to 1500 Watts due to the restriction of the input power cord.
• The input power plug is a US NEMA 5-15P plug. For users located in countries that require a different plug, please check if these plug travel adapters can fit. 
• The output power sockets are US NEMA 5-15R sockets. Users in other countries may need to find plug adapters or use wireable NEMA 5-15P plugs.  
• The default sensor cable is 6 ft (2 m). 20 ft (6 m) cable option is also available. 
• The refurbished unit is limited in stock. See here. 
• To avoid condensed water dripping into the humidity sensor and damaging the circuit board, please consider hanging the sensor block facing down. 
  

AW-HD330 side panel	AW-HD330 back panel

Manuals (for AuberWifi series controller AW-HD330):
[PDF] Instruction manual
[PDF] AW Series Wi-Fi Supplementary Guide
[Link] Click here for App guide (AuberWIFI)
[Android App] AuberWifi
[iOS App] AuberWifi 
[Link] FAQs for Wi-Fi Connection 

Manuals (for legacy models HD330-W)
[PDF] Instruction manual
[PDF] Supplementary manual for WIFI
[Android App] AuberSmart for Android (apk download)
[iOS App] AuberSmart for iOS
[Link] FAQs for Wi-Fi Connection 
[Video] WiFi Setup Video (Android, iOS)