DIN Rail Grounding Block

This is a grounding block to mount onto DIN rails. It is not only compatible with our 35 mm DIN Rail, but also can work with 32 mm rails.  

When building a control system in a large enclosure (e.g., B403020 or B404020), you will sometimes find that the grounding post is far away from the input receptacle or output sockets.  To wire everything in a nice and clean fashion, adding a grounding block can be a great solution. 

The photo below is an example showing how to use the grounding block with DIN Rail. Due to the mounting plate we supply in the enclosure has paint to prevent rust, the paint itsel will also create an insulation layer between the DIN Rail and the chassis. So to ground the input and output power, you should use a pair of the grounding blocks. One for connecting the grounding wire from the input power, the other is for connecting the DIN Rail to grounding post. Thus, all grounding wires can be connected to the chassis in a flexible way.

An inside view of our Brew Buddy Control Panel (BB400H). 

We are now offering the grounding block in two different sizes. One is for 30A system and you can use it with our 30A DIN Rail Terminal Bock Kit. The other one is for 60A system, and the block feeding size is the same as our 60A terminal block. Please select the appropiate block size for your system. 

In the photo, the left set is the grouding block for 60A system, and the right set is the grounding block for 30A system.



Assembled Picture (w/ grounding block for 60A system).

Specifications: