Out of stock.
PCO402 Control Panel (Enclosure with Minor Defects, Legacy Ver.)
This listing is for PCO402 with minor defects on the enclosure. Photos are available opon request. No return nor exchange. One-year limited warranty is applied.
Original Description:
This is a 240V 50A turn-key control panel for powder coating oven w/ light and fan control features. It allows you to run heating element up to 12,000 watt. It includes both temperature control and timer counting features, so user can cure the parts in the oven for a certain amount of time at the set temperature. This will maximize the finishing quality and minimize your time, resources and effort spent on building a control box. With the help of this control panel, your curing process can be easier and simpler.
If you do not need light & fan control, please go to
PCO303.
Feature:
- Powder coated wall-mount enclosure with 1/2" Knockouts on the bottom, side and back.
- Dual-line display PID controller with high temp alarm feature.
- Independent timer read-out with finishing alarm feature.
- Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
- Separate temperature alarm and timer alarm with flashing buzzers and optional red indicator.
- Mini digital volt and amp meter to show system power.
- Illuminated 22mm switches for intuitive of operation.
- Independent SSR and contactor for each heater outlet.
- Two independent controlled 120V outlets for light and fan.
- Side-mount breaker switch for overload protection.
Description:
This control panel is built with some of the most popular components offered by Auber Instruments to the metal finishing enthusiasts. With the PID controller SYL-2352, the user can directly change the set temperature by using the up and down arrow keys (view/change other system parameters by press and hold SET key for 2 seconds). The timer JSL-74 has only a few parameters to set up; if door needs to be opened during a batch, one can uses pause or stop key pad to interrupt the timer. When the batch is finished, the coating process can be started again by pressing the reset button.
When set temperature is reached, one can shut off one of the heaters to hold the temperature. The heater switches are connected to contactor coils. So once they are turned to OFF position, the heater outlet will be powered off completely by the contactor. Meanwhile, system performance is enhanced by SSR (Solid State Relay). When the heater switch is turned to ON position, the PID controller will provide power to the element via SSR which will take action in only 2 seconds.
The sensor provided in this control panel is our
TC-K3MM. It is suitable for low oven application and can handle up to 900 degree F. The 1/8" diameter probe offers a good balance between the fast response time in the air and reasonable mechanical strength. The base of the probe is made of a 0.55" (15 mm) long 5/16"-24 screw for easy mounting. The probe is 4" long and 1/8” (3.0 mm) diameter made of stainless steel with plated brass base. Default sensor cable length is 6 ft (2m), optional longer cable length 11 ft (3.5m) is also available.
Specifications
| Heater Control Output |
30A, 240VAC maximum. |
| Light/Fan Control Output |
5A, 120VAC maximum. |
| Input Connection |
50A, four conductors. |
| Sensor |
K Type Thermocouple sensor, spade connector. |
| Circuit Breaker |
2P 60A. |
| Temperature Controller |
SYL-2352 |
| Timer |
JSL-74 |
| Dimension (W x H x D) |
12 x 10 x 8 inch (30 x 25 x 20 cm) |
| Weight |
16 lb (7.25 kg) |
| Warranty |
One (1) year limited warranty. See here for details |
Note:
- The control panel is designed for North America 240V AC power line which requires four line power connections (L1, L2, Neutral and Ground), please verify your power supply before purchase.
- This control system is designed for heating element (resistive load) only, not for gas burner or propane heater. If you want to use the system for gas burner or the other types of heater, please contact us before purchase; otherwise, your purchase may not be covered by our warranty.
- Default sensor cable length is 6 ft (2m), optional longer cable length 11 ft (3.5m) is also available. If you need longer sensor cable, please contact us.
- Input power cord (SOOW 6/4) is not included because each user may have different hook up requirements.
- Heating element is not included.
- For a KIT of components to DIY, please check here.
- Lead time is approx. 2 to 3 business days.
Front View
Bottom View (Knockout for 1/2" EMT Fitting)
This product was added to our catalog on Friday 30 April, 2021.
