The KLN102 is a 30A control panel for electric kiln systems and heat treatment ovens. This enhanced PID controller utilizes a ramp and soak feature that has the ability to program up 30 stages. This panel is designed to handle up to one 5000W/240V heater or two 3000W/240V heaters.
Features:
- One powder coated wall-mount enclosure with knockouts is included
- Dual-line display PID controller with programmable capability.
- Illuminated 22mm switches for seamless operation.
- Flashing buzzer and alarm mute switches.
- Mini 2-in-1 Volt and Amp meter to show system power.
- Solid State Relay for precise temperature control.
- Use a contactor to completely shut off power to the element.
- High-temp K Type Thermocouple (max working temperature is 2300 º F) w/ ceramic mounting plate.
- 1/2-inch EMT conduit fitting for element connection.
- Strain relief power cord connector for hard-wiring the power line.
- Side-mounted breaker switch for overload protection.
- Assembled in USA
- US seller & US support team. This control panel is designed and manufactured by Auber Instruments. Copyright © Auber Instruments.
The KLN102 is built with some of the most popular products Auber has to offer. With SYL-2352P PID temperature controller, this panel can program up to 30 steps for ramp, soak and other logic actions. Also, this controller has two accessory relay outputs. They can be used for temperature alarms, or forced to turn on by special commands. For example, users can use alarm 1 (AL1) for high temperature alarms and alarm 2 (AL2) for low temperature alarms. Or use AL1 as temperature alarms and use AL2 as timer alarms.
In addition to the programming feature, this panel also has a flashing buzzer for high temperature alarm and indicator for showing heater status. 2 accessory relays on the controller have been connected with the two 2-position switches, which allows users to program the system for a variety of purposes.
Included is the high temperature type K thermocouple (TC-K-KLN), which is a ceramic probe used for firing up the kiln. It is designed to operate continuously at 2300°F (1300°C), or cone 6-temperature. This high quality OEM probe is the same probe used in many US made commercial kilns.
Specifications
| Heater Control Output |
30A, 240VAC maximum. |
| Input Connection |
30A, four conductors. |
| Sensor |
K Type Thermocouple sensor. |
| Circuit Breaker |
2P 32A. |
| Temperature Controller |
SYL-2352P |
| Dimension (W x H x D) |
10 x 8 x 8 inch (25 x 20 x 20 cm) |
| Weight |
10 lb (4.53 kg) |
| Warranty |
One (1) year limited warranty. See here for details. |
Note:
- This control panel is designed for North America 240V AC power lines that require four lines power connection (L1, L2, Neutral and Ground).
- Input power cord is not included because each user may have different hook up requirements.
- The heating element is not included.
- For a KIT to DIY, please check here.
- Lead time is about 2-3 business days.
Front View
Bottom View
Basic Tutorial Video (PID in this video: SYL-2352P)
This product was added to our catalog on Monday 01 October, 2018.
