Thanksgiving sale ends on 12/1/2024!
The color of the LED display can be supplied in red (default), amber, green, blue and white. When ordering, please select the color of the LED. This digital gauge can measure the manifold absolute or diesel engine boost pressure within 0.01 Bar or 0.1 PSI resolution and precision. It can be set to display pressure in either Bar or PSI units. The recall function allows user to check the maximum or the minimum pressure and its occurrence time after run. The meter has a programmable alarm that can be set as high limit or low limit alarm. The alarm is displayed on the front panel with bright LED that is very noticeable. The alarm signal can also be sent out from the built-in relay. It can turn on a buzzer or other device (such as a water cooler). The LED brightness can be synchronized with headlights. When the headlight is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad.
The gauge is supplied with your choice of an oil/water temperature probe. Two probe options with different lengths are offered: 34 mm (1.34") and 22 mm (0.87"). The default cable length is 78” (2 meters). Both probe options have a 1/8" NPT thread. If you need a longer cable, please select the 4 meter cable option. The maximum working temperature of the sensor is 250ºC (500ºF). For more details of the specs, please see our listing for P18NPT50 and PT100A-NPT.
 |
 |
| P18NPT50 |
PT100A-NPT |
Click here for instruction manual of SYL-1813
Click here for water/oil temperature sensor application guide
Click here for instruction manual of oil/water sensor installation guide
This product was added to our catalog on Tuesday 14 November, 2017.
