Thanksgiving sale ends on 12/1/2024!
This set includes one dual channel automobile multimeter (SYL-2813), two EGT probe with exposed tip (TC-KEGT). Please contact us if any questions.
 |
 |
 |
| Red/Red |
Green/Green |
White/White |
SYL-2813 gauge:
This dual channel automobile multimeter can measure and display two parameters at the same time. It can measure temperature, pressure and other important parameters such as battery voltage and air/fuel ratio. Two programmable alarms will turn on the LED in the front panel to get the driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. Each channel contains one relay. The meter stores peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlights. When the headlight is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. For thermocouple sensor, this gauge has a cold junction compensation circuit to improve the accuracy at low temperature and reduces the temperature drift when a thermocouple sensor is used.
The gauge is 48 x 48 mm, slight smaller than 52mm round gauge. It is 85mm in depth. For the housing of this gauge, please check our CBox16-B.
TC-KEGT Probe:
The gauge is supplied with your choice of two EGT (Exhaust Gas Temperature) sensors. It is a K type thermocouple sensor with exposed tip junction for fast response time. The probe diameter is 3/16", with several mounting thread options available (choose from the drop down list). The insertion depth is adjustable with 1.3" maximum. The default cable length is 78” (2 meters). The maximum working temperature of the sensor is 1000 ºC (1800 ºF). Longer cable option (4 meter or 13 ft) is available. If selected, you will get 13 ft leads for both EGT probes.
TC-KEGT Adapter Options:
This combo comes with two of the same EGT probe adapters. 10 adapters options are available.
 |
 |
 |
 |
| 1/8NPT |
M8x1 |
M10x1 |
Weld-in Carbon |
 |
 |
|
 |
 |
| Weld-in SS |
1/4NPT |
1/4BSPT |
1/2NPT |
Clamp On |
 |
Clamp on adapter |
Gauge Specifications:
| Input type |
Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducer, 0-375ohm, 0-5V, 0-75mV
Other transducer: 0-30 mV, 1-5V, 0-10V, 0-10mA, 0-20mA, 4-20mA |
| Display |
Two lines, Four digits. °F or °C, Bar, PSI, or user defined |
| Display resolution |
Thermocouple: 1°C, 1°F; RTD/CU50: 0.1°C, 0.1°F |
| Display brightness control |
12 V illumination control signal, or key pad |
| Accuracy |
±0.2% or ±1 unit of full input range |
| Control mode |
On-Off |
| Control output |
Relay contact: 3A at 240VAC |
| Alarm |
Relay (3A rating) high/low alarm |
| Recording function |
Maximum, Max time, |
| Recording time |
100 hrs with 1 min, or 9999 second with 1 s resolution. |
| Power consumption |
2 Watt |
| Power supply voltage rating |
12 -30 VDC |
| Panel cutout dimension |
45 x 45 mm |
| Dimension |
48 x 48 x 85mm (1/16 DIN) |
Click here for Gauge instruction manual.
Click here for EGT sensor installation guide for SYL-2813.
This product was added to our catalog on Friday 29 December, 2017.
