Inline Connector Pair for RTD sensor, 4-Pin

This 4-pin inline connector pair can be used to connect two 4-wire low-voltage cables (like 4-wire RTD cable or 4-wire temperature & humidity cable). The female connector is identical to the one we used for and RTDCON-4 or humidity sensor cable HSR-HD200. Both female and male connectors need to be mounted on the cable side. This connector pair contains spring locks to prevent disconnecting from accidental pulls on the sensor cable. 

For panel mount RTD connector, please check RTDCON-4. 

(Pictures are from RTDCON-3-N)
Left: Male Connector.
Right: Female Connector
Middle: Connector Pair.

Specifications: 

Connector Outer Diameter: 16 mm (0.625”)

To open the female connector, you need to unscrew the two small screws on the connector first. Here is the guide to check soldering points inside of the connector. Or check the video below for how to disassemble it.