This is a high-quality, push-pull style connector used on our deluxe cables. Its gold-plated contact pins are low in resistance, making it not only suitable for handling AC current up to 5 A, but also good for connecting sensors such as PT100 RTD sensors. The spring-lock on the plug can prevent it from being accidentally pulled out. The compression nut and clamping ring of the connector plug can take cables from 7.5 mm to 8.3 mm in diameter. The body of the connector is zinc alloy with nickle plating, which gives users a solid and smooth feel when holding it in hand.
This connector is compatible/inter-changable with the RTDCON connector used on our liquid-tight probes and braided cables.
Currently, 3-pin and 4-pin connector pairs are available, the plug is the female connector for cable, the receptacle is the male connector for the panel. Connectors in other configurations or a different number of pins are available upon request.
Shown in the picture: panel mount connector socket (left) and connector plug (right).
3-pin connector pair is shown in the picture: the soldering pin on the socket (left) and the female plug (right).
Specifications:
| Connector outer diameter |
17.5 mm |
| Panel cutout diameter |
12 mm
|
| Mounting nut thread |
Metric M12x0.75 |
| Body material |
Zinc alloy with nickel plating |
| Rated current |
5 A |
| Rated voltage |
125 VAC |
| Contact resistance |
<= 0.03 ohm |
| Wire size (for solder cup) |
<= 0.9 mm diameter |
| Cable outer diameter |
5 ~ 7 mm |
| Working temperature |
-20 ~ 85˚C |
[PDF] P2CON-XS12 Wiring Guide for Auber PT100 Probes
This product was added to our catalog on Wednesday 06 November, 2019.
