Illuminated Metal Pushbutton Switch, 110VAC, 16mm

Two options are offered, maintained action and momentary action. The maintained push-button switch can be used to control the 120Vac power to devices such as controllers, buzzers, or small fans. The momentary push-button switch can be used as a start key or a reset key for timers. 

There are three poles on the switch for wiring a load. One is normally open pole, one is for normally closed pole, and the third pin is the common pole. 

For wholesale inquiries of SW9-110, please check SW9-UL, or contact us. 

Specifications

Note: the nut and the gasket should both be installed behind the panel.

Four LED colors (blue/green/red/white) to choose from.
Left: Components included Right: Maintained Action: ON position on the left, OFF position on the right, momentary action: Right
Dimensions (mm)
Typical wiring: Turn indicator on when button is pressed	Indicator is always on