Waterproof Illuminated Short Profile 22mm Pushbutton

This push button switch is one of the shortest illuminated 22.5 mm switches on the market. The depth behind the panel is 48 mm (1.88"). It is the waterproof version of our SW15 pushbutton and used for outdoor purpose.

Two switch action options: maintained action or momentary action.
Four LED color options: red, yellow, green, and blue.
Two block configurations: 1) two normally open (NO) block, or 2) one normally closed (NC) block and one normally open (NO) block.
Two voltage options for LED light bulb: 120V and 240V. If you don't need the illumination feature, please choose No LED Block option. The switch head cover/cap still has the color selected in LED Color Option.   

The lower half of this switch can be divided into three blocks: one middle block for the LED light, and two switch blocks on the side. Each block is independent from other blocks. The power for the LED light should be connected to the middle block, which is represented by the same color as the LED color. There is no connection between LED light block and any of the NC or NO switch blocks. Two switch blocks are installed on the outer side. Additional blocks can be added to switch more pairs of wire. Whether the block is a NO or a NC block is printed on the side of its block. This can also be identified by looking at the bottom of the block. A green round dot indicates a NO block; a red round dot indicates a NC block.   

Specifications:
Mounting Cutout: 22.5 mm (7/8") diameter
Depth behind the surface of the mounting panel: 48 mm (1.88")
Illumination Voltage: 120 or 240 VAC
Operation Current Rating: 10A at 120 VAC or 240 VAC
Mechanical Life: 1,000,000 Cycles
Storage Temperature: -30ºC ~ 70ºC
Working Temperature: -25ºC ~ 55ºC
Working Environment Humidity: 45 ~ 85%RH
Illumination Type: LED
Illumination Color: Red, Yellow, Green, and Blue
Waterproof rating: IP65 (switch head only)

Click here for Switch Selection Guide