RGB Color Illuminated Metal Momentary Push Button Switch,19mm 6V

This is 19mm momentary metal push button switch with RGB tri-color LEDs. There is a RGB tri-color LED ring located on the front. 7 metal contacts are located on the back of this switch: three for switch action (NO, NC and common). four for RGB LED (red, green, blue and common anode). LED is rated as 6.3 VDC. 

To use LED: connect 3-6.3 VDC to the common anode contact (marked as C+), and connect the negative of DC power to any of red, green or blue contact. Then the target color LED will be lit up. No external resistor is needed. If you need to use it with higher voltage, an exteranl resistor is needed. 

This maintained push button switch can be used to control the 110 V or 220 V power to devices such as controllers, buzzers, or small fans. It has one pair of normally open (NO) contacts and one pair of normally closed (NC) contacts. Both are rated for 5 Amp at 250 VAC. Wiring connectors (7 pieces) are included.

Note 1: Wiring harness (wire connector, 7-lead) is offered for this switch. Please see the option above.

Note 2: 3 weeks lead time may apply for 100 pcs order. For questions of our switches (different LED color, size, wholesale pricing, etc), feel free to contact us. 

Specifications:

Note: the nut and the gasket should both be installed behind the panel.

Wiring connectors

Dimensions of SW18 switch (all number in the diagram is labeled in mm)