Flashing Buzzer, 110 or 240V AC. 22 mm

  • Model: FLBuz

(image for) Ask a Question

$6.95

Please Choose:



Add to Cart:

When connected to the PID controller alarm output, this flashing buzzer can be used to alert the user if temperature is too high or too low.  When the alarm conditions are met, it will beep and flash with a red light. It is designed to be mounted on a control panel with a standard 22 mm ­mounting hole. Since it is powered by AC, ­wiring it is much simpler than with a DC buzzer. No extra power supply is needed. This buzzer is to be powered by 110-120VAC. It is more suitable for small control panels that have limited mounting space. 

This flashing buzzer can also be used with our multifunction timer/counter. When the time or count meets the preset value, the relay can turn on the buzzer to inform the operator.  

Please check out the following demo video. In this example, the buzzer is connected to the controller's high limit alarm. It will turn on when temperature is above 208 degrees and off when temperature is below 198 degrees.

Specifications: 

Mounting Cutout 22 mm
Life ≥30000 hours
Brightness 40~60 cd/sq. m.
Voltage range ±20%
Dielectric Strength 2. 5kv

­


This product was added to our catalog on Thursday 14 April, 2011.

Copyright © 2024 auberins.com.