Sensor Extension Cable for TD Series

Lead time for the 12 ft option is 3 business days. 

The TD-Cable3 is a 3-conductor extension cable installed with Auber's 3-pin P2CON-XS12-CBL inline connector pair. On one end, it is installed with a 3-pin female connector plug with a spring lock. On the other end, it is installed with a 3-pin male connector that pairs with the female connector. 

The 3-pin female connector with a spring lock is the same female connector that has been used on many Auber's digital sensor cables (such as TD-SENSOR, TD-SENSOR14, and TD-Cable1), it can be directly added between the controller and the sensor cable as an extension cable.  

The cable in TD-Cable3 has three conductors wires, each of which is TEFLON insulated. All conductor wires are protected by a layer of metal braiding and an extra layer of TEFLON jacket on the outside, which makes the cable strong and weather resistant. The 3 conductor wires are matched pin to pin from one end to the other. 

This cable is compatible with Auber's current TD series plug-n-play controllers, including TD130, AW-TD130, TD230, TD330, TD420P, and TD500. It is not compatible with older models such as TD400P, TD100A, TD100B, TD110, TD200, TD300, TD400P, ECT-100, and ECT-100A.

The TD-Cable3 is available in 8 feet or 12 feet long. 

Connector Pin Assignment