75A Supplementary Control Panel for Auber control panels (75A 240V 18kW)

This is a 240V/75A supplementary control panel for customers who owned Auber control panels for electric ovens (SSR based). If the customer needs to heat a larger oven or if he wants to add more elements, but the main control panel cannot handle the increased current/wattage, this supplementary control panel will help. This 75A supplementary control panel will be controlled by the main Auber control panel directly. 

Feature:

• No separate temp control in this supplementary panel. Your main PCO panel will control this panel. 
• Enclosure with 1/2" Knockouts for easy connection.
• Volt and Amp meters for displaying system power level.
• Solid State Relay (SSR) for long lasting, fast and noise free power switching.
• Contactor for completely cut off power to the element.
• Strain-relief power cord connector for hard-wiring the power line.
• Independent thermometer, flashing audible buzzer for high/low temp alarms. 
• One oven temperature probe w/ mounting screws is included (both sensor and cable are rated for 900ºF).
• Assembled in U.S.

1. This supplementary control panel doesn't have a PID controller nor a temperature sensor. It cannot be used by itself. It needs to be used together with the Auber PCO control panel for electric ovens including PCO104, PCO204, PCO304, PCO404 and PCO504 as well as Auber legacy PCO control panels. This panel is also compatible with other Auber SSR based control panels such as KLN102, MS100, STL102, STL201, SMK103 and more. For questions, please contact us. 

2. This control panel needs to be powered up by a separate power supply. This control panel is designed for North America 240V AC power lines which require four line power connections (L1, L2, Neutral and Ground), same requirement as Auber PCO control panels. If you don't have neutral or if you are not in North America, please contact us.

3. This control panel comes with three output channels. There are two heater on/off switches on the front, one for each channel. Users can manually turn the each channel OFF. If turning either switch to ON position, the connected elements are controlled by the main control panel. 

3. By using this supplementary control panel together with your main control panel, you can increase the supported oven size by an additional 180 Cu.Ft.

4. Connection is required between the main PCO control panel and this supplementary panel. Minimum modification is needed on the main PCO control panel. Please provide your control panel part number during the checkout.

Power input & output connection options:

By default, power input & output cords need to be hardwired into this control panel. If you need a power output socket instead, please contact us.

• This control system is designed for heating elements (resistive load) only, not for gas burners nor propane heaters. If you want to use the system for a gas burner or other types of heater, please contact us before purchase; otherwise, your purchase may not be covered by our warranty. 
• Input power cord (SOOW 4/4) is not included because each user may have different hook up requirements.
• The heating element is not included.
• Lead time is about 3-4 business days.
• If you plan to use this control panel for a larger oven which is over its limit, you may consider using a supplementary control panel together with this panel. See CP30-PCO and CP50-PCO for details.

Front View (PCO504, for refenrece only)

Left View

Right View

Bottom View

Inside View (w/o connecting the power cord, for reference only)

Inside View (w/ power cord hard-wired, for reference only)

Click here for instruction manual of SYL-2362.