Thanksgiving sale ends on 12/1/2024!
The GSO203S is a standard turn-key control panel for the gas fired oven with light and fan control. With a built-in timer function, the included PID controller is able to hold the temperature for a certain period of time then power off the burner. To reset the timer and start another batch, press the blue reset button momentarily. During the batch, one can use a manual switch to turn ON/OFF the burner if needed. A yellow 2-in-1 voltmeter & ammeter shows the system power status. The alarm buzzer can be used for temperature alarm and/or finishing alarm. Separate alarm mute switch is included.
Features:
- Powder coated wall-mount enclosure with knockouts.
- Dual-line display PID controller with a built-in timer function.
- 22mm switches for intuitive operation.
- Flashing buzzer and alarm mute switch.
- Mini 2-in-1 Volt and Amp meter for displaying system power level.
- Oven temperature probe w/ mounting screws (both the sensor and cable are rated for 900 º F).
- 1/2 inch EMT connector for output connection.
- Strain Relief Power Cord Connector for hard-wiring the power line.
- Side-mount breaker for overcurrent protection.
- US seller & US support team. This control panel is designed and manufactured by Auber Instruments. Copyright © Auber Instruments.
Specifications
| Control Output |
15A, 120VAC maximum. |
| Light/Fan Control Output |
5A, 120VAC maximum. 1/2 inch EMT Connector. |
| Input Connection |
14AWG, 120V, 3 conductors (L, N, Ground) |
| Sensor |
K Type Thermocouple sensor w/ 4 inch probe. |
| Circuit Breaker |
2P 20A. |
| Temperature Controller |
SWA-2441B. |
| Dimension (W x H x D) |
10 x 8 x 8 inch (25 x 20 x 20 cm) . |
| Weight |
10 lb (4.54 kg). |
| Warranty |
One (1) year limited warranty. See here for details |
Note:
- Please provide your gas burner's brand and model number in the text box above. If you don't know, please enter "None" and email us a picture of your burner's specification. We may email you back for questions.
- Recommended gas burner: Carlin EZGas Pro, Carlin 201
- The control panel is designed for North America 120V AC power lines that require three line power connections (Hot line, Neutral and Ground). Please verify your power supply before purchase.
- For a KIT kit version of this panel, please check here.
- The gas burner is not included. If you need the panel for 12V, 24V or 240V gas burners, please contact us before purchase.
- The default sensor cable length is 6 ft (2m). An optional longer cable length of 11 ft (3.5m) is also available. If you need a longer sensor cable, please contact us.
- Lead time is about 2-3 business days.
- Protection plan for this kit is available here.
Front View
Right View
Bottom View
Tutorial Video for SWA-24X1.
This product was added to our catalog on Thursday 05 September, 2019.
