The KIT-PCO104 DIY kit is a basic 30A build-it-yourself control panel for the powder coating oven. With a built-in timer function, the included PID controller is able to hold the temperature for a certain period of time then power off the burner. To reset the timer and start another batch, press the blue reset button momentarily. During the batch, one can use a manual switch to turn ON/OFF the burner if needed. A yellow 2-in-1 voltmeter & ammeter shows the system power status. The alarm buzzer can be used for temperature alarm and/or finishing alarm. Separate alarm mute switch is included.
Wiring diagram and other installation files are available to download after purchase.
If you need light & fan control, please see KIT-PCO204.
This DIY kit/control panel is designed by Auber Instruments. US seller with US support team.
This kit includes each of the following:
- 10x8x8" Wall mount enclosure with knockouts (bottom & sides panels)
- Dual-line display PID controller with a built-in timer function.
- One 40A Solid State Relay and 40A heat sink.
- 2P32A110V DIN Rail mounted contactor to cut off element power completely.
- One Flashing Buzzer for temperature/timer alarm.
- Mini 2-in-1 Volt and Amp meter for showing system power.
- Red illuminated selector switch for alarm silence.
- Yellow illuminated selector switch for element control.
- Blue illuminated momentary push-button switch for resetting timer.
- Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
- Two 1/2-inch EMT fitting for sensor and element connection.
- One M28*1.5 Cable gland for hard-wiring the input power cord.
- Side-mount breaker for overcurrent protection.
- DIN Rail Terminal Block Kit for power distribution.
- Engraved Panel Labeling Tags.
Notes for the optional wiring kit (WK-PCO104):
This wiring kit includes all the wires you need to assemble this DIY kit (KIT-PCO104). All the wires are trimmed, numbered and installed with connectors. Wiring strippers and crimpers are saved. Only basic tools such as screwdrivers and socket wrench are required. Please see the pictures for the wiring kit below.
Note:
- The control panel is designed for North America 240V AC power lines which require four line power connections (L1, L2, Neutral and Ground), please verify your power supply before purchase. Please contact us if you have questions.
- This control system is designed for heating elements (resistive load) only, not for gas burners or propane heaters. If you want to use the system for a gas burner or other types of heaters, please contact us before purchase; otherwise, your purchase may not be covered by our warranty.
- Electrical assembly is required for this DIY kit. The assembled panel is available here: PCO104.
- Input power cord (SOOW 10/4) is not included because each user may have different hook up requirements.
- The heating element is not included.
- Optional hanger set is offered.
- Default sensor cable length is 6 ft (2m). Optional longer cable length of 11 ft (3.5m) is also available. If you need a longer sensor cable, please contact us.
Warranty: 6-month limited warranty. See here for details.
Protection plan for this kit is available here.
Assembly Video
Front view of the enclosure.
Bottom view of the enclosure with knockouts.
Right view of the enclosure with knockouts.
Left view of the enclosure with knockouts.
Optional Wiring Kit is available.
Optional Hanger
Manual Download Tip:
The instruction manual & installation documents are only available for downloading for customers who already purchased the kit. After purchasing the kit, please log in your account, go to your order history and find the order for this kit, then you can find a downloadable link to get the zip file of the manuals. If you have issues downloading the zip file, please use Chrome browser. For customers who checkout the kit without creating accounts, please use the original email address in your order and proceed with "forgot your password".
This product was added to our catalog on Friday 30 August, 2019.
