Waterproof 2P Maintained Illuminated 22mm Selector Switch

  • Model: SW16-WR

(image for) Ask a Question

Starting at: $15.98

Please Choose:







Add to Cart:

These are two-position selector switches with maintained action. They are one of the shortest illuminated 22.5 mm switches on the market. The depth behind the panel is 48 mm (1.88"). It is the waterproof version of our SW16 selector switch and used for outdoor purpose.

Two block configurations: 1) two normally open (NO) blocks, or 2) one normally closed (NC) block and one normally open (NO) block.
Four LED color options: red, yellow, green, and blue.
Two voltage options for LED light bulb: 120V and 240V. If you don't need the illumination feature, please choose No LED Block option. The switch head cover/cap still has the color selected in LED Color Option.   

The lower half of this switch can be divided into three blocks: one middle block for the LED light, and two switch blocks on the side. Each block is independent from other blocks. The power for the LED light should be connected to the middle block, which is represented by the same color as the LED color. There is no connection between LED light block and any of the NC or NO switch blocks. Two switch blocks are installed on the outer side. Additional blocks can be added to switch more pairs of wire.  Whether the block is a NO or a NC block is printed on the side of its block. This can also be identified by looking at the bottom of the block. A green round dot indicates a NO block; a red round dot indicates a NC block.     

Specifications
Mounting Cutout: 7/8" in (22.5 mm) Diameter
Length Behind the Mounting Panel: 48 mm  (1.88")
Illumination Voltage: 120 or 240 VAC 
Operation Current Rating: 10A at 120 VAC or 240 VAC
Mechanical Life: 300,000 Cycles
Number of Contact: 1 Normally Open, 1 Normally Closed
Switch Type: Maintained Action
Illumination Type: LED
Illumination color: Red, Yellow, Green, and Blue
Waterproof rating: IP65 (switch head only)

Click here for Switch Selection Guide


The picture shows the different color of the selector switches.  

The diagram shows the dimension of SW16-WR selector swithes (the unit is mm).


How to remove switch head.


How to disassemble the switch block.

 

Typical Wiring (110V AC):






 

Typical Wiring (US 240V AC):
 



 

 

 

 


This product was added to our catalog on Monday 01 November, 2021.

Copyright © 2024 auberins.com.