Holiday sale ends on 12/1/2024!
The AW-SYL-23X2P is a Wi-Fi-capable PID controller based on Auber's ramp/soak PID controller SYL-23X2P. This unit does everything a regular SYL-23X2P does and has 2.4 GHz Wi-Fi connectivity, which allows a user to access the controller remotely through the AuberWifi app anywhere with an internet connection.
Wi-Fi Connectivity Features:
- Monitor the current probe reading, view the data plot, and export historical data (note 3).
- Monitor the status of the main output and the alarm relays.
- Access and edit the ramp/soak program from the app.
- Control the ramp/soak program status (Run/Hold/Stop) from the app.
- Access and edit all parameters from the app.
- Receive alarm notifications pushed to your phone when the app is closed.
- Easy pairing process. Compatible with most modern routers with 2.4 GHz WiFi bands.
- Manage multiple AuberWifi (AW) series devices in one app.
- Capable of receiving updates over-the-air (OTA).
- The AuberWifi app is available for both iOS devices and Android devices.
See the supplementary user guide for AW-SYL-23X2 for how to add the device to the AuberWIfi app and how to access the device.
|
AuberWifi device list page. Manage multiple devices in the same app.
|
AuberWifi device main page for AW-SYL-2352P. |
Main Features of SYL-23X2P
This PID temperature controller is a 1/16 DIN controller with a two-line display. It has all the basic control functions of the standard PID controller such as SYL-2352 except the "manual control mode".
This ramp/soak controller can allow up to 30 steps programmed, making it suitable for applications that require complex heating profiles such as controlling heat treatment ovens. In each segment of the heating profile, a user can specify the start point of the temperature, the endpoint of the temperature, and the time duration during which this ramp/soak step should last. In addition, special actions can also be programmed: hold the program, stop the program, jump to a specified step, activate or deactivate one or both alarm relays.
Feature Summary of SYL-23X2P
- 30 programmable steps to implement ramp, soak, and other control actions.
- Step timers can be set from 1 min to 9999 min.
- PID control with fuzzy logic enhancement.
- Two alarm relays that can be triggered by temperature or be programmed.
- 0.2% accuracy over the entire input range.
- Temperature can be displayed in either Fahrenheit or Celsius.
- Parameter-lock option.
- High brightness, large digital LED module that can be read from a distance.
Model Selection
Currently, we offer this controller in two different output modules: AW-SYL-2342P (build-in relay output) and AW-SYL-2352P (12 VDC output). Please read the description below to choose the correct model for your application.
AW-SYL-2342P (relay output)
The output is a small C-Form 10A relay built into the controller. The relay contacts pull in or drop out as the output status changes.
AW-SYL-2352P ( 12 VDC output for solid-state relays)
The output is a 12 VDC signal for controlling external solid-state relays (SSRs).
For plug-n-play controller (max 20A) with AW-SYL-2352P, please check WS-2000F-AW.
Main Specifications
| |
AW-SYL-2342P |
AW-SYL-2352P |
| Input Type |
TC: K, E, S, WRe, J, T, B, N
RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm.
DC voltage: 0~20 mV, 0-100 mv, 0~5V, 1~5V, 0~1V, -100~100mV, -20~20mV, -5~5V, 0.2~1V.
DC current: 4~20mA. |
| Input Range |
K (-60~2300ºF), S (-60~3100ºF), WRe (32~4150ºF), T (-330~660ºF), E (32~1500ºF),
J (32~1800ºF), B (32~3300ºF), N (32~2400ºF)Pt100 (-320~1100ºF), Cu50 (-60~300ºF)
Linear input (note 2): -1999~+9999 defined by user |
| Display Module |
Two-line, four digits. Digital LED model. |
| Display Resolution |
1°C and 0.1 °C, or 1°F. |
| Accuracy |
±0.2% or ±1 unit of the full input range |
| Control Mode |
Fuzzy logic PID, On/Off |
| Main Output |
C-Form Relay w/ NO and NC contacts:
7 A at 240 VAC, 10 A at 120 VAC, or 10 A at 24 VDC |
12 VDC for external solid-state relays (SSRs) |
| Alarm |
Process high/low alarm, deviation high/low alarm |
| Alarm Output |
Relay contact (Resistive): 1 A at 240 VAC, 3 A at 120 VAC, or 3 A at 24 VDC |
| Power Input |
85 ~ 264 VAC / 50 ~ 60 Hz |
| Overall Dimensions |
1.89" x 1.89 x 3.94" (48 x 48 x 100 mm) |
| Mounting Cutout |
1.77" x 1.77" (45 x 45 mm), 1/16 DIN |
| Warranty |
6-month limited warranty. See details here. |
Wi-Fi Connectivity Specifications
| Wireless Standards |
2.4 GHz, IEEE 802.11 b/g/n |
| Security Protocols |
WPA/WPA2/WPA2-Enterprise |
Documents and Downloads
Note 0: Refurbished AW-SYL-2352P may be available here.
Note 1. Main default settings on the controller:
Input sensor type: type K thermocouple (SN = 0).
Temperature unit: Fahrenheit (°F)
Display resolution: 1 degree (DP = 0).
Note 2. Features that are not supported by the current WiFi firmware or app:
- The current AuberWifi app offers limited support for linear input sensor types such as DC voltage and DC current input signals. The app fully supports all compatible temperature sensor types with 1°C or 1°F display resolution.
- Jumping to another step is not supported by the app. It can only be done on the controller's keypad.
- The A-M indicator on the app is not synchronized with the controller when the program is on HOLD.
Note 3. Currently, the export data includes four values: PV, SV, OUT and time
Note 4. Optional spade connectors.
Optional 10 pcs spade connectors (for 22 ~ 16 AWG wire); colors are random, either red or blue.
Basic Tutorial Video (PID in this video: SYL-2352P, non-WiFi version)
Programming Tutorial Video (PID in this video: SYL-2352P, non-WiFi version)
This product was added to our catalog on Thursday 25 January, 2024.
