Gas Oven Controller Kit ft. Light & Fan w/ a Separate Timer

New product released!

The KIT-GSO400S DIY kit is a standard build-it-yourself control panel for the gas fired oven with light and fan control. Utilizing a PID temp controller and an independent timer, this panel can show set temp, run temp, set time and run time at the same time. To reset the timer and start another batch, press the blue reset button momentarily. During the batch, one can use a manual switch to turn ON/OFF the burner if needed. A yellow 2-in-1 voltmeter & ammeter shows the system power status.  The alarm buzzer is used for both temp alarm and finishing alarm. One can mute either alarm by its assigned mute switch.

Wiring diagram and other installation files are available to download after purchase.

Feature comparison between  GSO203S and GSO400S
1. For GSO203S, the PID controller has a built-in timer feature. By default, this meter will show temp reading on the top and timer on the bottom. You can start the timer automatically, once the reading temp reaches your set point. The timer function can also shut off the burner when time is up.
2. For GSO400S, it has one independent timer. So this panel can show both your reading temp, set temp and timer info at the same time. You need to manually start the timer. But once time is up, the timer can still shut off the burner. 
3. GSO203S has one buzzer and  one alarm mute switch. It can be used to mute both temp alarm and timer alarm at the same time. GSO400S has one buzzer and two alarm mute switches. Users can manually mute either the temp alarm or timer alarm. 

This DIY kit/control panel is designed by Auber Instruments. US seller with US support team. Copyright © Auber Instruments. 

This DIY kit includes each of the following:

• 12x10x8" powder coated wall-mount enclosure with complete knockouts (bottom & sides).
• Dual-line display PID controller.
• Dual-Line general purpose timer.
• One flashing buzzer and two alarm mute switches (one for temp alarm and another for timer alarm).
• Mini 2-in-1 Volt and Amp meter for showing system power.
• Black selector switch for alarm silence.
• Black selector switch for burner ON/OFF control.
• Blue illuminated momentary push-button switch for resetting timer.
• Green illuminated maintained selector switches for light and fan control.
• Oven temperature probe w/ mounting screw (both the sensor and cable are rated for 900 º F).
• 1/2-inch EMT fitting for sensor, burner, light and fan connection.
• One M18*1.5 cable gland for hard-wiring input power cord. 
• One 6FT 5-15P to ROJ 14 AWG power cord.
• Side-mount breaker for overcurrent protection.
• DIN Rail Terminal Block Kit for power distribution. 
• Engraved Panel Labeling Tags. 

• Please provide your gas burner's brand and model number in the text box above. If you are not sure, please enter "None" and email us a picture of your burner's specification. We may contact you if we need any more information. 
• Recommended gas burner: Carlin EZGas Pro, Carlin 201
• The control panel is designed for North America 120V AC power lines that require four line power connections (Hot line, Neutral and Ground). Please verify your power supply before purchase.
• Electrical assembly is required for this DIY kit. The assembled panel is available here: GSO400S.
• Default sensor cable length is 6 ft (2m). An optional longer cable length of 11 ft (3.5m) is also available. If you need a longer sensor cable, please contact us. 
• Gas burner is not included.
• Optional hanger set is offered. 
• If you want the kit for the 12V/24V/240V gas burner, please contact us. 

Warranty: 6-month limited warranty. See here for details.

Protection plan for this kit is available here. 

CLICK HERE TO SEE THE FINAL LOOK OF AN ASSEMBLED PANEL.

Front view of enclosure (knockouts on the front)

 

Front view of enclosure (knockouts on the side).

 

Bottom view of enclosure(knockouts on the bottom).

 

Optional Hanger

 

Click here for instruction manual of SYL-2342.
Click here for instruction manual of JSL-74A.

Manual Download Tip: 
The instruction manual & installation documents are only available for downloading for customers who already purchased the kit. After purchasing the kit, please log in your account, go to your order history and find the order for this kit, then you can find a downloadable link to get the zip file of the manuals. If you have issues downloading the zip file, please use Chrome browser. For customers who checkout the kit without creating accounts, please use the original email address in your order and proceed with "forgot your password".