Illuminated Metal Pushbutton Switch, Maintained/Momentary, 22mm

This maintained or momentary pushbutton switch can be used to control the 120 V power to devices such as controllers, buzzers, and small fans. It has one pair of normally open (NO) contacts and one pair of normally closed (NC) contacts. Both are rated for 5 Amp at 250 VAC. The LED indicator needs to be powered by 110 VAC. 6 pcs of wiring connectors are included.

For wholesale inquiries of SW13, please check SW13-UL, or contact us. 

Specifications:

	SW13
LED Color	red, green, or blue
LED Voltage	110 VAC
Operation Current Rating	5 A @ 120 VAC, 3 A @ 250 VAC
Panel Thickness	1 ~ 8 mm (5/16'')
Cutout Diameter	22.5 mm (7/8'')
Switch Terminals	Pin 1 and 2, NC; Pin 3 and 4, NO; Pin 5 and 6, LED
Operation Type	maintained or momentary
Ingress Protection	IP65
Body Material	Copper plated Cr
Accessories	6 wiring connectors

Click here for Switch Selection Guide 

​Note: the nut and the gasket should both be installed behind the panel.

 

Keyword: Vandal-proof, Vandal-resistant switch