30A Brew Panel Enclosure with Knockouts w/ 80A Heat Sink

  • Model: B404020-EB

(image for) Ask a Question

Starting at: $99.99

Please Choose:



Precut Option



DIN Rail Option




Timer Option




Add to Cart:

Clearance while supplies last!

This 16 x 16 x 8” enclosure is for the Electric Brewery Control Panel published by “theelectricbrewery.com” with few small modifications. All the front and bottom holes on this enclosure are knockouts instead of precut holes. User can remove those knockouts easily on user end. The top heat sink hole is precut hole. This knockout option is useful if the customer wants to make some modification and may not use all the holes as the original design. 

The enclosure comes with an external mounted 80A SSR heat sink. The heat sink mounting of the original design involves several steps of preparation to fit properly. We made a larger heat sink with a clean look. It offers three sets of mounting holes for the SSR. The dimension for the heat sink is 138mm x 260mm x 30mm (5.5" x 10.0" x 1.5"). 

The original beige colored paint is much more difficult to paint than the black color. Any imperfection of the top paint, or small scratch by the normal use will expose the base color. So, we changed the base paint to a strong and durable industrial flat textured black finish (base paint). It makes the final finish paint easier, or you can use it without any prior painting. 

The box is made from 0.060" (1.5 mm) thick steel. The mounting holes for the two chromed handles are not drilled because some customer may not use them. The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. Gasket, plugs and hangers are provided. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers. 

Small screw holes for socket mounting were not tapped, but left for the user to drill, so that the mounting orientation and screw type option will be more flexible during the installation. The opening for XLR connector is about 22mm.

Please click here to download hanger installation guide

Note: 
a. Four controller value bundle options are available. You can use SYL-2352 or SYL-2802 as thermometer. For multi-vessel system, please see here for selection guide. 

b. JSL-73C timer is optional.  
b. For front panel precut dimensions, please check theelectricbrewery. For bottom panel precut dimensions, please check here
c. For international buyers who are internested in this box, please contact us for more shipping options. 
d. Panel caps are available for 1/16 DIN hole and 22mm round hole. Please check here
e. Optional DIN Rail set is offered. It includes one piece of DIN Rail, one pair of DIN Rail end caps and one set of mounting screws & nuts. 
f. Scratches & dents B404020-EB is limited available here
 
 

Front view, w/ Knockouts
 

Bottom view, w/ Knockouts

Internal view

This product was added to our catalog on Wednesday 08 July, 2015.

Copyright © 2024 auberins.com.