Digital EGT Thermometer/Pyrometer with analog output

larger image

Model: SYL-1812RA

$78.50

Add to Cart:

Features:

Compact size and easy to fit into most machines (24 x 48 x 75 mm or 1x2 x3")
Supports 10 different types of commonly used temperature sensor inputs.
Supports 9 different voltage and current inputs that can be used to accept signal from many different types of transducer to monitor pressure, flow, and battery condition.
Displays Maximum, Minimum value and its timestamps with a single touch of the key pad.
Bright LED display, easier to read than LCD display used on most thermometers.
Alarm output when temperature/parameter is out of range.
Operate by DC voltage from 8.5 to 16.5 VDC, Great for automobile application such as exhaust gas temperature meters (EGT).
Displays temperature in either Fahrenheit or Celsius.
Four digits LED display can go up to "9999" or 0.1 degree resolution (with Cu50 RTD sensor)
Adjustable display brightness that can be synchronized with headlights.
Analog output (retransmit) for data logger or data acquisition recording.
Two points calibration for high accuracy
Manual and technical support
90-days warranty

Description:

This is a brand new 1/32 DIN (24 x 48 x75mm) digital thermometer, pyrometer and process monitor. Compatible with 10 different temperature sensors and 9 types of voltage and current signals, it can be used in a broad range of temperature, pressure, and flow measurement applications. The meter offers 0.2% accuracy for temperature sensors. It also offers two points calibration (zero and range) for other transducers. The meter can record maximum and minimum value with corresponding timestamps.

Its compact size makes it easy to fit in anywhere.

This meter is great for automobile applications because it is can be powered directly by the car battery. Its bright LED display is easier to read from a distance than many dim LCD type digital thermometers. The peak holding function will hold the maximum temperature in the memory and allow the driver to review after the test run. The meter has a programmable alarm that can be set as high limit or low limit alarm. The alarm is displayed on the front panel with bright blue LED that is very noticeable. The alarm signal can also be sent out from the built-in relay. It can turn on a buzzer or a cooling device for EGT control. The LED brightness can be synchronized with headlights. When the headlight turns on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad.

This meter has an analog output function (also called retransmit function). It will output the display reading as a linear analog signal for data logger or data acquisition system. The output can be set to either 0-20 mA or 4-20 mA current. It can also be converted to voltage output with a 1% precision resistor.

Specifications:

Input type	TC: K, E, S, R, J, T, B, WRe3-WRe25 RTD: Pt100, Cu50, 0-375ohm pressure, 0-75mV current, 0-30 mV, 0-5V, 1-5V, 1-10V, 0-10mA, 0-20mA, 4-20mA.
Input range	K (-200~+1300ºC), S (-50~+1600ºC), WRe3-WRe25 (0~2300ºC ), R (-50~+1600ºC), T (-200~400ºC), E (-200~900ºC), J (-200~1200ºC), B (350~1800ºC), Pt100 (-200~+600ºC), Cu50 (-50~150ºC)
Display	One lines, Four digits. °F or °C.
Display resolution	1°C, 1°F, or 0.1°C, 0. 1°F, with Cu50 RTD
Display brightness control	12 V illumination control signal, or key pad
Accuracy	±0.2% or ±1 unit of full input range
Control mode	On-Off
Control output	Relay contact: 3A at 240VAC
Alarm	Relay (3 A rating) high/low alarm,
Analog output (retransmit)	0-20mA, 4-20mA, can be converted to voltage w/ resistor
Power consumption	<2 Watt
Power supply voltage rating	12 (8.5-16.5)VDC
Dimension	24 x 48 x 75mm (1/32 DIN)