Holiday sale ends on 1/1/2025!
New EZboil controller is available here: DSPR320 for boiling, step-meshing, and low oxygen brewing (LODO).
DSPR310D is a digital power regulator designed to automate the liquid mashing and boiling processes. This model is based on EZboil® DSPR300 with following features:
1) Programmable temperature profile for step mashing mode (such as RIMS/HERMS). User can program the different mashing temperature and time duration for every step. Up to eight steps can be programmed.
2) A multi-events timer, similar to our
JSL-73C timer, is added for the boiling processing mode. This timer can activate the built-in buzzer to remind the operator to add ingredients at specific time. Up to nine timer events can be programmed.
3) The built-in relays can be set to be synchronized with the mashing and boiling steps/events to turn on or off at selected step(s)/event(s). Or you can set it as standard absolute high/low temperature alarm.
Specifications:
Power input: 90-260VAC, 50 Hz or 60 Hz.
Control resolution: 1%.
Control mode: burst firing mode* (see note below)
Temperature sensor input: Pt100 RTD.
Temperature display resolution:1°C or °F,
Timer range: 99 hr 59 minutes with 1 min resolution..
SSR Output: 12VDC, 80 mA. (It can drive up to 6 SSRs in parallel)
SSR requirement: Zero-cross, DC triggered AC SSR
Alarm Output: 3A for resistive load, 1A for inductive load
Dimension:
Overall: 1.89 x 1.89 x 4.49" (48 x 48 x 114 mm), 1/16 DIN.
Mounting cut out: 1.77 x 1.77" (45 x 45 mm)
Length: 100 mm (from the front panel to the back); 114 mm if include the rotary knob.
Products Powered by EZboil®:
Turnkey brewing controller:
CUBE CU001,
WS-2500,
WS-2000FB,
BB100,
BB300,
BB400
DIY kits:
KIT-BREW,
KIT-EZboil,
KIT-BIAB,
KIT-CUBE1,
KIT-BB1,
KIT-BB2
Note:
1. The burst rate will between 1 and 100 pulses for each 100 AC cycles. The pulse width equals to one AC cycle. It is automatically adjusted for 50 or 60 Hz.
2. The temperature sensor is not included. This controller can read PT100 RTD temperature sensor. Here is the link for RTD temperature sensors (Pt100 type) that can be used with this controller.
3. This unit should be used with SSR (see our 5A, 25A, 40A, 80A, 100A SSR), it's not compatible with solid state voltage regulators (SSVR).
4. Refurbished DSPR310D is limited in stock
here.
This product was added to our catalog on Sunday 14 May, 2017.
