Wiring Harness for Illuminated Metal Push Button Switch

This wiring harness makes your switch installation easier than before. Simply connect your compatible switch to this wiring harness, and you are ready to use. With this wiring harness, you do not need to solder the switch terminals directly. You can replace the switch anytime by just removing the switch from that socket.

Compatible switches: SW9-UL (16 mm), SW18-UL (19 mm), SW13-UL (22 mm) and SW18-UL-RGB (19 mm). 

Note: This wiring harness is not compatible with non-UL switches which we offer. 

Part#: WH-16

WH-16 is compatible with SW9-UL 16mm switch. This harness has five colored wires. Wire length is 5" or 130mm. Wire gauge: 22 AWG. 

Part#: WH-19

WH-19 is compatible with SW18-UL 19mm switch. This harness has five colored wires. Wire length is 5" or 130mm. Wire gauge: 22 AWG. 

Part# WH-22

WH-22 is compatible with SW13-UL 22mm switch. This harness has six colored wires. Wire length is 5" or 130mm. Wire gauge: 22 AWG. 

Part# WH-19-7

WH-19-7 is compatible with SW18-UL-RGB 19mm switch. This harness has seven colored wires. Wire length is 5" or 130mm. Wire gauge: 22 AWG. 

Part# WH-19-8

WH-19-8 is compatible with SW18-2P-UL 19mm 2-pole switch. This harness has eight wires with five colors. Wire length is 5" or 130mm. Wire gauge: 22 AWG.