Still Heat Control Panel (240V 30A 7200W)

The STL102 is a 30A still heat control panel for automating the distillation process. This panel is designed to handle up to one 5000W/240V heater or two 3000W/240V heaters.  It has one still heat controller to control the distillation process in your boiler.

• One powder coated wall-mount enclosure with knockouts is included.
• Dual-line still heat controller (DSPR400) with 0.1-degree resolution in boiling mode.
• Illuminated 22mm switches for intuitive operation.
• Flashing buzzer and alarm mute switches.
• Mini 2-in-1 Volt and Amp meter to show the system power.
• Solid State Relay for precise temperature control.
• Use a contactor to completely shut off power to the element.
• Strain relief power cord connector for hard-wiring the power line. 
• One PT100 Liquid tight RTD sensor with 12-ft silicone braided cable
• 240V 30A NEMA L6-30R socket for heater connection.
• Breaker switch for overload protection
• DIN Rail and DIN Rail Terminal Blocks for power distribution.
• Assembled in USA
• US seller & US support team. This control panel is designed and manufactured by Auber Instruments. Copyright © Auber Instruments. 

The STL102 is built with some of the most popular products Auber has to offer. With the DSPR400 temperature controller, users can take in the enjoyment of making alcohol while skipping the tedious process of automating the distillation. In mash mode, its temperature control function utilizes an artificial intelligence algorithm optimized for mashing application. It is easier to understand and more convenient to operate than a PID controller. In distilling mode, the boiler heat is controlled by the linear and uniform power output with 1% resolution; the temperature is monitored in 0.1-degree resolution. The distillation process can be stopped by either a preset temperature or preset time. DSPR400 comes with two alarm relay outputs which are connected to the front flashing buzzer. Users can program both alarm outputs to set alarms and receive notifications when to remove foreshots/heads at specific temperatures.

A PT100 RTD probe is offered with the listing and should be installed at the boiler. Seven tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need. If you choose none for the probe, no cable will be included. 

Tri-clamp Probe#	Part#	Flange OD	Probe Length
1	PT100-C	1.988” (50.5mm)	1.58” (40mm)
2	PT100-C	1.988” (50.5mm)	2.36” (60mm)
3	PT100-C	1.988” (50.5mm)	6” (150mm)
4	PT100-C	1.988” (50.5mm)	8” (200mm)
5	PT100-C-2	2.52” (64mm)	2.36” (60mm)
6	PT100-C-2	2.52” (64mm)	6” (150mm)
7	PT100-C-2	2.52” (64mm)	8” (200mm)

 

Three color options for the silicone braided cable: red, black, blue and yellow.

If you need an additional vapor thermometer in this panel, please check STL201.

 Note:

• This panel is designed for North America 240V AC power lines that require four lines power connection (L1, L2, Neutral and Ground). 
• Input power cord (SOOW 10/4) is not included because each user may have different hook up requirements.
• The heating element is not included.
• If you are interested in getting a DIY KIT, please go to here.
• Lead time is about 2-3 business days.

Front View

 

Bottom View 

Click here for instruction manual of DSPR400