Thanksgiving sale ends on 12/1/2024!
This set includes one dual channel automobile multimeter (SYL-2813) with two oil/water temperature sensors. Please contact us if any questions.
 |
 |
 |
| Red/Red |
Green/Green |
White/White |
SYL-2813 gauge:
This dual channel automobile multimeter can measure and display two parameters at the same time. It can measure temperature, pressure and other important parameters such as battery voltage and air/fuel ratio. Two programmable alarms will turn on the LED in the front panel to get the driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. Each channel contains one relay. The meter stores peak temperature/pressure with time stamps that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of the LED display can be synchronized with headlights. When the headlight is turned on at night, the display will be dimmed by the illumination signal. It can also be dimmed directly on the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy of most 3 digits gauges on the market. For thermocouple sensor, this gauge has a cold junction compensation circuit to improve the accuracy at low temperature and reduces the temperature drift when a thermocouple sensor is used.
The gauge is 48 x 48 mm, slight smaller than 52mm round gauge. It is 85mm in depth. For the housing of this gauge, please check our CBox16-B.
Oil/water temperature sensors x 2:
The gauge is supplied with your choice of an oil/water temperature probe. The probe has 1/8" NPT thread. Two probe lengths are offered: 34 mm (1.34") and 22 mm (0.87"). The default cable length is 78” (2 meters). If you need longer cables for both probe 1 and probe 2, please select the 4 meter cable options. The maximum working temperature of the sensor is 250ºC (500ºF). For more details of the specs, please see our listing for P18NPT50 and PT100A-NPT.
 |
 |
| P18NPT50 |
PT100A-NPT |
Gauge Specifications:
| Input type |
Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50
Pressure transducer, 0-375ohm, 0-5V, 0-75mV
Other transducer: 0-30 mV, 1-5V, 0-10V, 0-10mA, 0-20mA, 4-20mA |
| Display |
Two lines, Four digits. °F or °C, Bar, PSI, or user defined |
| Display resolution |
Thermocouple: 1°C, 1°F; RTD/CU50: 0.1°C, 0.1°F |
| Display brightness control |
12 V illumination control signal, or key pad |
| Accuracy |
±0.2% or ±1 unit of full input range |
| Control mode |
On-Off |
| Control output |
Relay contact: 3A at 240VAC |
| Alarm |
Relay (3A rating) high/low alarm |
| Recording function |
Maximum, Max time, |
| Recording time |
100 hrs with 1 min, or 9999 second with 1 s resolution. |
| Power consumption |
2 Watt |
| Power supply voltage rating |
12 -30 VDC |
| Panel cutout dimension |
45 x 45 mm |
| Dimension |
48 x 48 x 85mm (1/16 DIN) |
Click here for SYL-2813 instruction manual.
Click here for water/oil temperature sensor application guide
Click here for instruction manual of oil/water sensor installation guide
This product was added to our catalog on Friday 30 October, 2020.
