Thanksgiving sale ends on 12/1/2024!
This is a kit to DIY your 30A mushroom sterilizer heat control panel. If you have one 5000-Watt element or two 3000-Watt element, this is the right choice. In addition to a still heat controller, it also has a flashing buzzer for high temperature alarm and indicator for showing heater status. Wiring diagram and other installation manuals are available after purchase.
A PT100 RTD probe is offered with the listing and should be installed at the boiler. Seven
tri-clamp probe options are available. Please leave a note for the tri-clamp probe# you need.
| Tri-clamp Probe# |
Part# |
Flange OD |
Probe Length |
| 1 |
PT100-C |
1.988” (50.5mm) |
1.58” (40mm) |
| 2 |
PT100-C |
1.988” (50.5mm) |
2.36” (60mm) |
| 3 |
PT100-C |
1.988” (50.5mm) |
6” (150mm) |
| 4 |
PT100-C |
1.988” (50.5mm) |
8” (200mm) |
| 5 |
PT100-C-2 |
2.52” (64mm) |
2.36” (60mm) |
| 6 |
PT100-C-2 |
2.52” (64mm) |
6” (150mm) |
| 7 |
PT100-C-2 |
2.52” (64mm) |
8” (200mm) |
Three color options for the silicone braided cable: red, black, blue and yellow.
This kit includes each of the following:
- 10x8x8" Wall mount enclosure with knockouts.
- Dual-line display power regulator (SWA-2451B) with built-in timer feature.
- 40A Solid State Relay and 40A heat sink.
- Flashing Buzzer for temperature/timer alarm.
- Mini 2-in-1 Volt and Amp meter for showing system power information.
- Blue momentary push button for timer reset purpose.
- Contactor for completely cutting off element power.
- One PT100 Liquid tight RTD sensor with one 12-ft silicone braided cable. Mating cable connector is XLRCON-M.
- 240V 30A NEMA L6-30R Socket for heater connection.
- Breaker switch for overload protection
- 30A Strain Relief Power Cord Connector for hard-wiring the power line.
- DIN Rail and DIN Rail Terminal Blocks for power distribution.
- Engraved Panel Tags for labeling.
Note:
- This kit is designed for North America 240V AC power line that requires four lines power connection (L1, L2, Neutral and Ground).
- Input power cord is not included because each user may have different hook up requirements.
- Heating element is not included.
- US seller & US support team. This control panel & its DIY kit are designed by Auber Instruments. Copyright © Auber Instruments.
Warranty: 6-month limited warranty. Please see here for details.
To see the final look of the assembed unit, please go to here.
Front view of the enclosure.
Optional Wiring Kit is available. It includes all the different sizes of wires & connectors to build this kit.
This product was added to our catalog on Tuesday 05 January, 2021.
